Publicité
Take an unused cassette, or one
holding an unwanted recording, from
its case, press the ON/OFF/EJECT
lever downwards
(yw), slide the cassette
into the cassette holder and press the
cassette holder down firmly until it
locks in position.
Press Pre-tuning Button 8 on the VCR.
First push the left of the two drawers
on the front of the VCR to release the
catch, then fully pull out the drawer.
Prepare both the camera and the
sound source for use and switch on
the TV set before continuing with Step
6. Press the last pre-selector which
has been prepared for use with the
VCR (see Page 52 Step 15).
Set the ON/OFF/EJECT lever to the
ON position (@).
NOTE Should the VCR automatically
switch off at this stage reset the lever
to the ON position (4).
:
Press the reset button of the counter.
Publicité
