Publicité
Press the START key.
Switch on the TV set and press the
pre-selector reserved for use with the
VCR (normally the last).
Adjust the controls of the TV set to
get the best picture quality. If
necessary, slowly adjust the
*TRACKING' control on the VCR until
the picture is free from tracking
interference. Normally, a setting of "¢q"
gives the best results.
In order to "freeze" the picture, press
the STOP MOTION button and then
the STOP bar.
NOTE When the picture is frozen, the
VCR will automatically switch off in
about 2 minutes.
;
If the picture is distorted, lightly and
quickly press the START key one or
more times.
NOTE During this procedure the
TRACKING
control does not function.
Publicité
