Publicité
56
= =
ag
AZ:
|
Gq
Repeat Steps 21 and 22 until the
programme on the television screen.
changes when the STOP bar is
pressed.
Set the ON/OFF/EJECT
lever to the
OFF position.
"NOTE The recorded programme is fed
to your TV set via a UHF modulator in
the VCR. It may happen that a TV
station in your area transmits on the
same channel.
In that case a programme is shown on
the TV set about one minute after the
VCR has been switched off.
Your dealer can adjust the VCR to
another modulator frequency in order
to assure the best picture quality of
the recorded programme.
Publicité
