Publicité
Part 2 Adjusting the TV set
A pre-recorded cassette is required
when adjusting the TV set for use with
your VCR. If you do not have such a
cassette at your disposal, Steps 2 to
10 describe how to make one yourself.
If you do have one, insert it in the
VCR and follow the procedure starting
at Step 14.
Check that the set is installed properly
(See Part 1).
Take a cassette from its case.
Press the ON/OFF/EJECT
lever
downwards
(¥), slide the cassette
completely into the cassette holder
and press the cassette holder down
until it locks in position.
Press Pre-tuning Button 1 on the front
panel.
Push the left-hand drawer on the front
of the VCR to release the catch, then
pull out the drawer.
Publicité
