Publicité
2P
Asn.
Press the RECORD
key and the
START key, simultaneously.
Turn Tuning Wheel 1 on the VCR until
the VIDEO lamp lights. It indicates
that a television channel is being
received. The intensity of the AUDIO
lamp varies with the rhythm of the
audio signal of the programme.
If the
COLOUR
lamp lights, the programme
is in colour. Finely tune Tuning Wheel
1 to find the mid-position of the range
over which the VIDEO lamp is lit.
Push the drawer back to the closed
position.
Press the reset button of the counter.
Wait approximately five minutes whilst
the programme is recorded.
Press the STOP bar.
You have now made a test recording
that can be used to tune your
television set by following the
instructions given in Steps 11 to 24.
Press the REWIND
key.
Publicité
