Publicité
ELECTRIC STARTING SYSTEM (TT-R125E/TT-R125LWE)
2
1
8
M
9
3
4
5
7
6
6 - 8
ELECTRIC STARTING SYSTEM
(TT-R125E/TT-R125LWE)
STARTING CIRCUIT CUT-OFF SYSTEM
OPERATION
If the main switch is set to "ON", the starter
motor can only operate if at least one of the
following conditions is met:
The transmission is in neutral (the neutral
G
switch is closed).
The clutch lever is pulled to the handlebar
G
(the clutch switch is closed).
The starting circuit cut-off relay prevents the
starter motor from operating when neither of
these conditions has been met. In this
instance, the starting circuit cut-off relay is
open so current cannot reach the starter
motor. When at least one of the above condi-
tions has been met the starting circuit cut-off
relay is closed and the engine can be started
by pressing the start switch.
WHEN THE TRANSMISSION IS
IN NEUTRAL
WHEN THE CLUTCH LEVER IS
PULLED TO THE HANDLEBAR
1 Battery
2 Main fuse
3 Main switch
4 Start switch
5 Starting circuit cut-off relay
6 Neutral switch
7 Clutch switch
8 Starter relay
9 Starter motor
–
+
ELEC
Publicité
