Publicité
HANDLEBAR
2. Install:
Handlebar grip (left) 1
G
Apply the adhesive to the handlebar 2.
NOTE:
Before applying the adhesive, wipe off grease
or oil on the handlebar surface a with a lac-
quer thinner.
3. Install:
TT-R125/TT-R125E/TT-R125LW
Collar 1
G
4. Install:
Throttle grip assembly 1
G
Grip cap (upper) 2
G
Throttle cable 3
G
On tube guide 4.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
5. Install:
Throttle cable cap 1
G
Screw (throttle cable cap) 2
G
Grip cap (lower) 3
G
Screw (grip cap) 4
G
Cover (grip cap) 5
G
WARNING
After tightening the screws, check that the
throttle grip 6 moves smoothly. If it does
not, retighten the bolts for adjustment.
5 - 49
CHAS
2 Nm (0.2 m · kg, 1.4 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
Publicité
