Publicité
Å
Å
ı
1
ı
1
a
FRONT FORK
12. Measure:
Oil level a
G
Out of specification → Adjust.
Standard oil level:
TT-R125/TT-R125E:
122 mm (4.80 in)
TT-R125LW:
130 mm (5.12 in)
TT-R125LWE:
125 mm (4.92 in)
From the top of the inner tube,
with the inner tube fully com-
pressed, and without the fork
spring.
13. Install:
Fork spring
G
Washer
G
Spacer
G
(TT-R125/TT-R125E/TT-R125LW)
Cap bolt 1
G
Dust boot
G
NOTE:
Temporarily tighten the cap bolt.
Å TT-R125/TT-R125E/TT-R125LW
ı TT-R125LWE
Installation
1. Install:
Front fork
G
NOTE:
Temporarily tighten the pinch bolt (lower
G
bracket).
Do not tighten the pinch bolt (upper bracket)
G
yet.
2. Tighten:
Cap bolt 1
G
3. Adjust:
Front fork top end a
G
Front fork top end (standard) a:
Zero mm (Zero in)
Å TT-R125/TT-R125E/TT-R125LW
ı TT-R125LWE
5 - 40
CHAS
23 Nm (2.3 m · kg, 17 ft · lb)
Publicité
