Publicité
ENGINE REMOVAL
NOTE:
Apply the lithium soap base grease on the
G
thread of the engine mounting bolts (rear) 2.
Tighten the engine mounting bolt (upper) 8,
G
and then tighten the bolts (engine bracket)
9.
Shift pedal link
1. Install:
Shift pedal link 1
G
Bolt (shift pedal link) 2
G
NOTE:
Adjust the center a of the front end of the shift
pedal to match the highest point of the foot-
rest.
Drive sprocket
1. Install:
Drive sprocket 1
G
Drive chain 2
G
NOTE:
Install the drive sprocket together with the
drive chain.
2. Install:
Drive sprocket holder 1
G
Bolt (drive sprocket)
G
3. Install:
Drive sprocket cover 1
G
Bolt (drive sprocket cover) 2
G
4 - 69
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
6 Nm (0.6 m · kg, 4.3 ft · lb)
12 Nm (1.2 m · kg, 8.7 ft · lb)
Publicité
