Publicité
CLUTCH AND PRIMARY DRIVEN GEAR
5. Install:
Ball
G
NOTE:
Apply the engine oil on the ball.
6. Install:
Push rod 1 1
G
Push plate 2
G
Washer 3
G
Nut (push rod 1) 4
G
7. Install:
Pressure plate 1
G
Clutch spring 2
G
Bolt (clutch spring) 3
G
NOTE:
Align the arrow mark a on the pressure
G
plate with the punched mark b on the clutch
boss.
Tighten the bolts in stage, using a crisscross
G
pattern.
8. Check:
Push lever position
G
Push the push lever assembly in the
arrow direction and make sure that the
mach mark are aligned → adjust.
a Match mark on the push lever assembly
b Match mark on the crankcase
4 - 47
ENG
6 Nm (0.6 m · kg, 4.3 ft · lb)
Publicité
