Publicité
REAR WHEEL AND REAR BRAKE
5 - 29
5. Install:
Springs 1
G
Brake shoes 2
G
On brake shoe plate 3
NOTE:
Apply the lithium soap base grease on the
G
pivot pin.
When installing the springs and brake shoes,
G
take care not to damage the springs.
When replacing the brake shoes, replace the
G
springs as a set.
WARNING
Do not apply grease to the brake shoe lin-
ings.
Rear wheel
1. Install:
Wheel bearing 1
G
Spacer 2
G
Wheel bearing 3
G
Oil seal 4
New
G
NOTE:
Apply the lithium soap base grease on the oil
G
seal lip when installing.
Install the bearing with seal facing outward.
G
Use a socket that matches the outside diam-
G
eter of the race of the bearing.
Right side of bearing shall be installed first.
G
Install the oil seal with its manufacture's
G
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
CHAS
New
Publicité
