Publicité
CYLINDER HEAD
3. Install:
Timing chain
G
Camshaft sprocket
G
Installation steps:
Turn the crankshaft counterclockwise with
G
a wrench.
Align the "I" mark a on the rotor with the
G
stationary pointer b on the crankcase
cover.
Align the match mark c on the camshaft
G
sprocket with the stationary pointer d on
the cylinder head.
Fit the timing chain 1 onto camshaft
G
sprocket 2 and install the camshaft
sprocket on the camshaft.
NOTE:
When installing the camshaft sprocket, keep
the timing chain as tense as possible on the
exhaust side.
CAUTION:
Do not turn the crankshaft during instal-
lation of the camshaft. Damage or
improper valve timing will result.
Remove the safety wire from the timing
G
chain.
4. Install:
Washer
G
Bolt (camshaft sprocket)
G
NOTE:
Temporarily tighten the bolt (camshaft sprocket)
at this point.
4 - 17
ENG
Publicité
