Publicité
LS
3
1
2
2
4
U P
3
a
1
4
HANDLEBAR
6. Install:
TT-R125
Front brake lever holder 1
G
Bolts (front brake lever holder) 2
G
Front brake cable 3
G
Clamp
G
NOTE:
Apply the lithium soap base grease on the
front brake cable end.
TT-R125E
Start switch 1
G
Bolts (start switch) 2
G
Front brake cable 3
G
Clamp
G
NOTE:
Apply the lithium soap base grease on the
front brake cable end.
TT-R125LW
Brake master cylinder 1
G
Brake master cylinder bracket 2
G
Bolt (brake master cylinder bracket) 3
G
NOTE:
Install the bracket so that the arrow mark a
G
face upward.
First tighten the bolts on the upper side of the
G
brake master cylinder bracket, and then
tighten the bolts on the lower side.
TT-R125LWE
Start switch 1
G
Brake master cylinder 2
G
Brake master cylinder bracket 3
G
Bolt (brake master cylinder bracket) 4
G
NOTE:
Install the bracket so that the arrow mark a
G
face upward.
First tighten the bolts on the upper side of the
G
brake master cylinder bracket, and then
tighten the bolts on the lower side.
5 - 50
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
9 Nm (0.9 m · kg, 6.5 ft · lb)
9 Nm (0.9 m · kg, 6.5 ft · lb)
Publicité
