Télécharger Imprimer la page

Corghi LaserLine EM 9580 Manuel D'utilisation page 75

Masquer les pouces Voir aussi pour LaserLine EM 9580:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87
- Press the Exit button to save the setting and
exit
.
The selected configuration is displayed on the
status bar in the working environment.
Unbalance rounding-off
configuration
Sets the unbalance rounding-off to grams x1 or
grams x5, or, if set to ounces, to oz x 1/4 or oz x 1/10,
with which the unbalance values are displayed.
-
Select the unbalance rounding-off
icon.
-
The following icons are displayed:
Set grams x1; displays the unbalance values
gram by gram.
Set grams x 5; displays the unbalance values
5 grams by 5 grams.
If the unit of measurement is ounces:
Set tenths of an ounce; displays the unbalance
values in tenths of an ounce.
Set fourths of an ounce; displays the unbalance
values in quarters of an ounce.
-
Press the the Kis knob or ENTER button to
select the icon desired.
-
Press the Exit button to save the setting and
exit
.
Unbalance unit-of
measurement (g/oz)
configuration
Sets the unit of measurement to grams or ounces.
After the list of the setting programmes is dis-
played, proceed as follows:
EM 9580 - Operator's manual
-
Select the unbalance unit of measurement
icon
.
-
The following icons are displayed:
g; displays the unbalance values in grams.
oz; displays the unbalance values in ounces.
-
Press the
the Kis knob or
select the icon desired.
-
Press the Exit button to save the setting and
exit
.
After selecting, the new setting is saved and the
unbalance image is displayed again.
OPT warning configuration
Enables/disables the Optimisation programme
warning at the end of the spin. After the list of
the setting programmes is displayed, proceed
as follows:
- Select the Enable/Disable OPT warning icon
.
The following icons are displayed:
OPT OFF; deactivates the OPT warning.
OPT ON; activates the OPT warning;
- Press the Kis knob or the ENTER key to select
the required icon.
- Press the Exit button to save the setting and
exit.
The selection can also be seen in the working
screen status line.
Preferred program
configuration
Allows two preferred icons to be set on the main
ENTER button to
UK
75

Publicité

loading