Corghi LaserLine EM 9580 Manuel D'utilisation page 50

- fix the ultrasonic sensor support to the guard
pipe using the supplied screws (Fig.9a);
- connect the sensor cable to the connector on
the side of the casing (A, fig.9b)
IMPORTANT: once the ultrasonic sensor is
assembled, calibrate the sensor as described
in the paragraph "Calibration of the ultrasonic
width sensor".
After assembling the machine, position it in the
selected place and make sure that the spaces
surrounding it are at least equal to the ones
indicated in fig.10.
50
9a
Main working elements of the
9b
A) Automatic diameter and distance measur-
ing arm
B) Automatic width measuring Ultrasonic
sensor (optional)
C) Head
D) LCD Monitor
E)
Kis control keypad
F) Side flange holder
G) Top weight tray
6 0 0
machine (fig. 11)
EM 9580 - Operator's manual
10
11