Publicité
Les langues disponibles
Les langues disponibles
- Have a thorough knowledge of the features and
characteristics of the machine.
- Keep unauthorised persons well clear of the
working area.
- Make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force.
- Make sure that all machine operators are suit-
ably trained, that they are capable of using the
machine correctly and safely and that they are
adequately supervised during work.
- Do not touch power lines or the inside of electric
motors or any other electrical equipment before
making sure that they have been powered off.
- Read this booklet carefully and learn how to
use the machine correctly and safely.
- Always keep this user manual in a place where
it can be readily consulted and do not fail to
refer to it.
WARNING
Do not remove or deface the DANGER, WARN-
ING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If one
or more decals have been detached or dam-
aged, replacements can be obtained from your
nearest dealer.
- When using and carrying out maintenance on
the machine, observe the unified industrial
accident prevention regulations for high voltage
industrial equipment and rotating machinery.
- Any unauthorised alterations made to the
machine automatically release the manufac-
turer from any liability in the case of damage
or accidents as a result of such alterations.
Specifically, tampering with or removing the
machine's safety devices is a breach of the
regulations for industrial accident prevention.
WARNING
During work and maintenance operations,
always tie back long hair and do not wear
loose clothing, ties, necklaces, wristwatches
or any other items that may get caught up in
the moving parts.
52
Key to caution and instruction
labels
Never use the wheel spin shaft
as a lifting point for the machine.
Unplug the power supply plug
before performing any mainten-
ance/repair operations on the
machine.
Do not lift the guard when the
wheel is rotating.
MAIN CHARACTERISTICS
- Automatic machine self-diagnostics when
starting up.
- Variable balancing speed (from 75 to 98 rpm
depending on the wheel type) so as to:
• minimise spin times;
• reduce risks resulting from moving parts;
• increase energy saving.
- Wheel positioned close to the operator so as
to make the application of adhesive weights
easier.
- Automatic sensor for measuring distance and
diameter and for adhesive weight application
in Alu P programs.
- AWD (Auto Width Device) programme for
measuring the width using an ultrasonic sensor
(available upon request).
- "AWC" (Auto Width Calculation) programme for
enabling the manual insertion of the width (ma-
chine versions without the ultrasonic sensor).
- Automatic stop of the wheel at the end of the
spin.
- Wheel-holder shaft clamping brake (button-op-
erated).
- STOP button to stop the machine immediately.
- Side flange-holder.
- Top tray for storing weights and most frequently
used accessories.
- Automatic execution of balancing procedure
when the guard is lowered.
- High-resolution LCD monitor, indispensable
aid for executing new programmes.
- User-friendly graphics for fast and effective
EM 9580 - Operator's manual
Publicité
