Corghi LaserLine EM 9580 Manuel D'utilisation page 53

learning of the machine's functions.
- Touch-sensitive keypad for data entry and
programme selection.
- On-screen interactive help.
- Multi-language texts.
- Multi-microprocessor processing unit (32 bit).
- Unbalance value display in grams or ounces.
- Unbalance measurement accuracy: 1g (1/10 oz).
- Wide selection of programmes.
- Two rounding-off modes to display unbalances.
- Balancing modes available:
• Standard: dynamic on the two sides of the rim.
• Alu / Alu p: seven different methods for alloy
rims.
• Motorcycle dynamic: dynamic on the two sides
for motorcycle rims.
• Motorcycle ALU: dynamic on the two sides for
alloy motorcycle rims.
• Static - on a single plane.
- "Mobile planes" program (in Alu P) for using
multiple five-gram weights, i.e. available
without the need for partial cuts.
- "Hidden weight" program (in Alu P) for dividing
the outer side balancing adhesive weight into
two equal weights positioned behind the rim
spokes.
- "Split Weight" programme (in motorcycle pro-
grammes) for dividing the calculated weight
into two equal weights positioned behind the
rim spokes.
- "OPT Flash" programme for removing residual
unbalances.
- "FSP" (Fast Selection Program) programme
for the automatic selection of the balancing
programme.
- "Weight Management" Programme (available
upon request).
- General utility programmes:
• independent calibration of the machine's
components;
• main screen customisation;
• spin overall and partial number counter;
• selection of the 2 most used programmes;
• visualisation of the service and diagnostics
page.
- Independent working environments that allow a
maximum of three operators to work in parallel
with no need to reset any data.
- RPA: automatic wheel positioning in the position
where the balancing weight has to be applied.
- "Visual inspection" function that allows round-
ness defects of the wheel and rim to be visually
checked.
EM 9580 - Operator's manual
- Possibility to select the position for applying
the adhesive weight:
- Vertical plane in the lower part of the wheel
(H6) using the LASER line
- Vertical plane in the upper part of the wheel
(H12)
- CLIP: using the weight-holder terminal in the
ALUP balancing programmes (in all the other
H12 balancing programmes)
TECHNICAL DATA
Power supply voltage: ............. 1Ph 100-230V 50-60Hz
Rated current: .......................................................1.7-4A
Overall power: ....................................................... 400W
Balancing speed:......................................75-85-98 rpm
Maximum unbalance value calculated: ................999g
Average wheel spin time (with 5"x14" wheel): 5.5 sec.
Shaft diameter: .................................................... 40mm
Working environment temperature: ............. 5 to 40°C
Machine dimensions
depth with guard closed ............................... 1377 mm
depth with guard open .................................... 894 mm
width with guard ............................................ 1453 mm
height with guard closed ............................... 1652 mm
height with guard open .................................. 1884 mm
Working range
automatic rim width...............................from 1.5" to 20"
manual rim width...................................from 1.5" to 25"
automatic rim diameter............................from 1" to 28"
rim diameter can be set manually..........from 1" to 35"
automatic max. wheel/machine distance .....................
...........................................................from 1 to 350 mm
max. wheel/machine distance can be set manually ...
.......................................................... from 1 to 500 mm
max. wheel width (with guard)...........................560 mm
max. wheel diameter (with guard)....................1118mm
maximum wheel weight..........................................75 kg
Machine weight (without accessories).................140 kg
Operating noise level.....................................<70 dB(A)
UK
53