Wacker Neuson RT82-SC3 Notice D'emploi page 99

RT / RTx
7.10 Draining the Fuel Filter Water Separator—Kohler Engine Only
Procedure Perform the procedure below to drain the fuel filter water separator.
1. Place a suitable collection container beneath the fuel filter (a).
2. Loosen the cap (b) on the bottom of the fuel filter. This allows water and
sediment to drain through the hole in the cap.
3. Tighten the cap.
4. Carefully remove the collection container and dispose of the contents in
accordance with local environmental regulations.
wc_tx003819gb_FM10.fm
General Maintenance
99
a
b
wc_gr012197