Wacker Neuson RT82-SC3 Notice D'emploi page 96

General Maintenance
7.6 Cleaning SmartControl™ Transmitter
The transmitter and switches are completely sealed to keep dust and moisture out;
however, contact with water should be kept to a minimum. Even a small amount of
moisture can cause connections and contacts to corrode. Avoid immersing
transmitter in water and do not clean using a pressure wash.
To clean the transmitter:
1. Wash off the transmitter using a damp cloth. Allow it to air dry.
2. To remove dirt and dust trapped around switches, use low-pressure
compressed air.
96
RT / RTx
wc_tx003819gb_FM10.fm