Wacker Neuson RT82-SC3 Notice D'emploi page 64

Operation
4.24 Starting, Operating, and Stopping the Machine
■ Machine is in serviceable condition and has been properly maintained
Requirements
■ There is fuel in the tank
Starting the Perform the procedure below to start the machine.
machine
1. Set the throttle switch (a) to the low speed (idle) position.
2. Rotate the starting key (b) clockwise to the ON (l) position.
■ All lights on the display/control panel and the light ring (c) (both red and
■ After 5 seconds, all lights go off except the power ON indicator (d), charge
This procedure continues on the next page.
e
d h
f
amber) will illuminate for a 5-second LED test.
indicator (e), engine oil pressure indicator (f), and the amber LEDs of the
light ring which remain illuminated.
g
j
k
64
RT / RTx
c
a
b
wc_gr012210
wc_tx003863gb_FM10.fm