Wacker Neuson RT82-SC3 Notice D'emploi page 76

Engine Control Module (ECM) Diagnostics
5.5 Connecting the Diagnostic Tool—Kohler Engine Only
Use the diagnostic tool to access the diagnostic capabilities of the Engine Control
Module (ECM).
To connect the diagnostic tool:
1. Shut down the machine.
2. Open the engine compartment.
3. Remove the cap from the connector (a) on the wiring harness.
4. Plug the diagnostic tool (b) into the wiring harness.
a
b
76
RT / RTx
wc_gr012201
wc_tx003818gb_FM10.fm