Publicité
Les langues disponibles
Les langues disponibles
General Maintenance
7.11
Maintaining the Fuel Filter Water Separator—Kubota Engine Only
■ Engine is stopped
Requirements
■ Suitable container to collect drained fuel/water
■ New filter
Draining the
Perform the procedure below to drain the fuel filter water separator.
bowl
1. Locate the drain valve (a) on the fuel filter water separator.
2. Place a suitable collection container beneath the drain valve.
3. Open the drain valve by turning it counterclockwise. This will drain the fuel/
water.
4. Close the drain valve when draining is complete.
Note: Dispose of drained fuel/water in accordance with the local environmental
protection regulations.
Changing the
Perform the procedure below to change the filter.
filter
1. Pull the filter (b) and bowl (c) (as an assembly) off the housing (d).
2. Unscrew the bowl from the filter. Discard the filter.
3. Install a new filter onto the housing.
4. Re-install the bowl.
100
RT / RTx
d
b
c
a
wc_gr012416
wc_tx003819gb_FM10.fm
Publicité
