Wacker Neuson RT82-SC3 Notice D'emploi page 110

Engine Maintenance: Kubota D902
9 Engine Maintenance: Kubota D902
The viscosity of the engine oil is an important factor when determining the correct
engine oil to use in your machine. Use an engine oil of appropriate viscosity based
on the expected outside air temperature. See the table below.
WARNING
Most used liquids from this machine such as oil, gasoline, grease, etc., contain
small amounts of materials that can cause cancer and other health problems if
inhaled, ingested, or left in contact with skin for prolonged periods of time.
► Take steps to avoid inhaling or ingesting used liquids.
► Wash skin thoroughly after exposure to used liquids.
Oil Viscosity
Engine oil should be MIL-L-2104C or have properties
of API classification CF or higher.
Change the type of engine oil according to the
ambient temperature.
Above 25°C (77°F)
-10°C to 25°C
(14°F to 77°F)
Below -10°C (14°F)
When using oil different from the previous one, be
sure to drain all the previous oil before adding the new
engine oil.
110
SAE30 or SAE10W-30
SAE15W-40
SAE10W-30 or SAE15W-40
SAE10W-30
770059
wc_tx003910gb_FM10.fm