Publicité
Les langues disponibles
Les langues disponibles
operating manual(s). Jump-starting is a two-person
operation. The operator must be in the operator's seat
when jump-starting so the machine will be under control
when the engine starts. Wear appropriate PPE before
attempting to jump-start your machine.
WARNING! A battery explosion or a run-away
machine could result from improper jump-starting
procedures. (See page 38, Battery Hazards.)
After Starting Engine
Observe gauges, instruments, and warning lights to
assure that they are functioning and their readings are
within the operating range.
Run an Operating Check
Do not use a machine that is not in proper operating
condition. It is your responsibility to check the condition
of all systems and to run the check in a safe area.
Masked Visibility Areas
Machines have areas where the operator's visibility
of the job site can be affected by the machine itself.
ROPS posts, attachments, a drum, even items in the
cab, could limit your view of the surrounding area and
possibly mask hazards or people around you. These
masked visibility areas vary from machine to machine,
and it is very important you be aware of these areas
before operating your machine.
Follow these safety precautions to reduce the hazards
posed by masked visibility areas:
• Look around the machine before operating. Objects
near the machine and close to the ground can be
diffi cult to see from the cab.
• Always look in the direction of travel, including
reverse. A back-up alarm is no substitute for looking
behind you when operating the machine in reverse.
• Keep bystanders away, even if your machine is
equipped with a back-up alarm.
20
Start Safely
To avoid explosion,
follow proper jump-
starting procedures
Operate Safely
Test Controls
Roller compactors come equipped with various control
confi gurations, patterns and operating modes, each
with their own handling characteristics. Some have
selectable or confi gurable controls, to suit personal
preferences or specifi c applications. Make sure that
you know which control pattern you have selected and
that you understand how the machine will handle when
using that control pattern.
Make sure the machine is operating properly by doing
the following:
• With the control levers or joysticks in neutral, test
engine speed control.
• Operate each pedal, lever or joystick to make sure all
functions are correct.
• Operate the travel control lever(s) or joysticks to
ensure correct operation in forward and reverse. Test
steering to the right and to the left, while moving
slowly in a clear, safe area.
WARNING! Before operating the machine under
working conditions, be certain you can control both
the speed and direction of the machine. Any loss of
control could result in death or serious injury.
Remember These Rules
Never allow untrained, unqualifi ed, or unauthorized
personnel to operate your machine.
Never allow other personnel to ride on your machine
unless appropriate seating is provided, and then, only if
authorized to do so.
Never abuse your machine. Misuse or abuse can cause
an accident.
Articulated Machines
Never enter or place any part of your body in the "hitch
area" or "pinch areas" of an articulated machine while
the engine is running, or when there is any chance
another person could start the machine.
If available, use the articulated joint lock during
maintenance work, transportation, etc.
Keep body parts away
from pinch area
19
Publicité
