Publicité
Les langues disponibles
Les langues disponibles
General Maintenance
Continued from the previous page.
2. Clean the filter cover (b).
3. Remove the filter cover, and remove the filter element (c) and the lower filter
housing (d).
Note: As you remove the filter element and the lower filter housing, take care to
note the proper location of all sealing O-rings.
NOTICE: To avoid machine damage, be extremely careful to avoid dropping
anything into the reservoir housing (e) while the filter cover is off.
4. Re-install the drain plug.
5. Fill hydraulic tank through filter housing using clean hydraulic oil.
6. Install new filter element as shown in illustration.
7. Replace the O-rings, lower filter housing, and filter cover.
c
e
94
RT / RTx
b
d
wc_gr012191
wc_tx003819gb_FM10.fm
Publicité
