Wacker Neuson RT82-SC3 Notice D'emploi page 102

General Maintenance
7.13 Storage
Do not allow the roller to sit overnight in a ditch, trench or other low-lying area
which might fill with water during a heavy rain. Park the roller on a flat level surface,
out of the way of traffic patterns and congestion. If the roller must be parked on an
incline, chock the drums to prevent any chance of movement.
If leaving the roller on the job site, remove the key and lock the control panel cover
and engine hood to prevent tampering. Both the front and rear hoods and access
cover are equipped with a locking ring (a) for use with a padlock for this purpose.
If desired, the SmartControl™ can be removed from the roller and stored
separately.
a
102
RT / RTx
a
wc_gr012196
wc_tx003819gb_FM10.fm