Publicité
Les langues disponibles
Les langues disponibles
General Maintenance
7
General Maintenance
7.1
Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Roller
Check for loose or missing fasteners.
Replace as needed.
Check hydraulic oil. Fill to correct level.
Clean control box / transmitter.
Verify that receiving eyes blink rapidly when
approached by the operator.
Grease articulated joint.
Grease steering cylinder.
Change hydraulic system return line filter.
Change hydraulic fluid.
1
Change after the first 100 hours of operation.
Daily
Every
before
100
starting
hours
1
90
RT / RTx
Every
Every
500
1000
hours
hours
or 1 year
or 2 years
wc_tx003819gb_FM10.fm
Publicité
