DAB Esybox Serie Instructions Pour L'installation Et L'entretien page 75

BL Red: on
White: on
Blue: off
The display shows Red: on
White: on
Blue: off
BP1 Red: on
White: on
Blue: off
The display shows Red: off
White: on
Blue: off
15. DISPOSAL
This product or its parts must be disposed of in an environment-friendly manner and in compliance with the local regulations concerning the
environment; use public or private local waste collection systems.
16. GUARANTEE
Any use of faulty material or manufacturing defects of the appliance will be eliminated during the guarantee period contemplated by the law in force in the
country where the product is purchased, by repair or replacement, as we decide. The guarantee covers all substantial defects that can be assigned to
manufacturing faults or to the material used if the product has been used correctly, in accordance with the instructions.
The guarantee is void in the following cases:
– attempts to repair the appliance,
– technical alterations to the appliance,
– use of non original spare parts,
– tampering.
– inappropriate use, for example industrial use.
Excluded from the guarantee:
– parts subject to rapid wear.
When making a request under guarantee, apply to an authorised technical assistance service, presenting proof of purchase of the product.
ENGLISH
3. Setpoint not reachable with the set RM value
Faulty pressure sensor.
1. Excessive absorption.
2. Pump blocked.
1. Supply voltage too low.
2. Excessive drop in voltage on the line.
One or more devices have sensitive parameters
not aligned.
73
3. Set a RM value that allows the setpoint to be
reached.
Contact the assistance centre.
1. Fluid too dense. Do not use the pump for fluids
other than water.
2. Contact the assistance centre.
1. Check the presence of the correct supply
voltage.
2. Check the section of the power supply cables.
Press the + key on the device which we are sure
has the most recent and correct configuration of
the parameters.