Keysight 53210A Mode D'emploi page 65

53210A Software Installation and Interface Configuration 2
The USB Address String
When programming the 53210A over USB, the instrument's USB address is
included in the address string as follows:
USB0::2391::1287::0123456789::0::INSTR
To simplify addressing during programming, a VISA alias can be assigned and
used in place of the complete address. To assign an alias from Connection Expert,
click the ellipses button. This opens the Ed it Alias dialog box. Click .
Enter the alias and then select OK (Figure 2-6).
Figure 2-6 Setting a VISA Alias for the USB Address String.
Disabling the USB Interface
The USB interface can be disabled from the front panel by selecting I/O Config,
followed by USB Settings, and then USB Off. When disabling or enabling the USB
interface, you must cycle power for the change to take affect. When disabled, the
interface cannot be configured by the Connection Expert utility.
Keysight 53210A User's Guide 65