Keysight 53210A Mode D'emploi page 239

Table A-1 53210A Error Message Descriptions.
Code Message
Sel f-Test failed:
+904 main CPU error accessing boot
environment
Sel f-Test failed:
+905
failed to read FPGA revision
Sel f-Test failed:
+906
FPGA revision is less than expected
Sel f-Test failed:
+907
PIC communication failure
Sel f-Test failed:
+908
battery test failed
Sel f-Test failed:
+909
GPIB test failed
Sel f-Test failed:
+910
channel 2 test failed
Sel f-Test failed:
+911
front panel revision check failed
Sel f-Test failed:
+912
measurement board test failed
Keysight 53210A User's Guide
Description
Verify and if necessary, install the latest firmware update and
re-run the self-test. If the failure occurs with the latest firmware
revision installed, contact Keysight.
These self-tests perform a communication test to detect the
presence of the battery, GPIB, and Channel 2 options. Verify and if
necessary, install the latest firmware update and re-run the
self-test. If the failure occurs with the latest firmware revision
installed, contact Keysight.
Verify and if necessary, install the latest firmware update and
re-run the self-test. If the failure occurs with the latest firmware
revision installed, contact Keysight.
53210A Error Messages A
239