Publicité
Les langues disponibles
Les langues disponibles
2
53210A Software Installation and Interface Configuration
Software Requirements
The environments available to program the 53210A are dependent upon the IO
libraries and drivers installed. Download and install the IO Libraries software from
www.keysight.com/find/iosuite.
The IVI-C and IVI-COM drivers for the instrument can be found on the web at:
www.keysight.com/find/53210A
Table 2-1
location (media) where specific drivers and libraries can be found.
Table 2-1
Interface
LAN
LAN, GPIB, USB
LAN, GPIB, USB
LAN, GPIB, USB
LAN, GPIB, USB
LAN, GPIB, USB
LAN, GPIB, USB
LAN, GPIB, USB
[a] Visit
50
summarizes the environments, IO driver recommendations, and the
53210A Development Environments and Drivers.
Development Environment
Web-enabled instrument interface
> SCPI Command Interface window
Keysight Connection Expert
> Interactive IO window
Microsoft® Visual Studio®
> Visual C++
Microsoft® Visual Studio®
> Visual Basic
Microsoft® Visual Studio® .NET
> C#, C++, Visual Basic
Keysight VEE
National Instruments LabVIEW™
National Instruments LabWindows/CVI
www.keysight.com
for the latest version of the Keysight IO Libraries Suite.
IO Driver Recommendations
Firmware revision 3.0 or greater
[a]
Keysight IO Libraries
VISA - Keysight IO Libraries
IVI-C - Web
VISA-COM - Keysight IO Libraries
IVI-COM - Web
IVI-COM - Web
IVI-COM - Web
53210A native mode driver
IVI-C - Web
IVI-C - Web
Keysight 53210A User's Guide
[a]
[a]
Publicité
