Keysight 53210A Mode D'emploi page 154

6 53210A Math, Graphing, and Data Logging
The offset value (B) is set with the command:
CALCulate[1]:SCALe:OFFSet {<offset>|MINimum|MAXimum|DEFault}
CALCulate[1]:SCALe:OFFSet? [{MINimum|MAXimum|DEFault}]
offset
-1.0E+15 to -1.0E-15,
The default
instrument preset (
Inverting the Reading (1/x)
its use in the Mx-B equation which thus becomes M/x-B. Inversion is enabled with
the command:
CALCulate[1]:SCALe:INVert {OFF|ON}
CALCulate[1]:SCALe:INVert?
ON
Following a reset (
disabled.
When Invert x is enabled (On) the front panel reading units (Hz, sec) are turned
NOTE
off. See
154
values can range from
is
offset 0.0
SYSTem:PRESet
- inverts the reading.
*RST
"Assigning Reading
0.0, +1.0E-15 to +1.0E+15
and is the value set following a reset (
).
Each reading as it is taken can be inverted prior to
disables reading inversion.
OFF
) or instrument preset (
Units" if displayed units are required.
*RST
) reading inversion is
SYSTem:PRESet
Keysight 53210A User's Guide
(query form)
) or
(query form)