Keysight 53210A Mode D'emploi page 131

Trigger Slope Example
//configure for frequency, set system trigger parameters
CONF:FREQ 5E6,0.1,(@2)
System Trigger Delay
The delay between receipt of the internal or external system trigger signal and the
start of the first measurement
TRIGger:DELay {<time>|MINimum|MAXimum|DEFault}
TRIGger:DELay? [{MINimum|MAXimum|DEFault}]
– specifies the delay in seconds.
Trigger Delay Example
//configure for frequency, set system trigger parameters
CONF:FREQ 5E6,0.1,(@2)
Keysight 53210A User's Guide
TRIG:SOUR EXT
TRIG:SLOP POS
0.0s.
TRIG:SOUR EXT
TRIG:SLOP POS
TRIG:DEL 1
// trigger source external
// trigger slope - positive
(Figure 5-2) is set with the command:
and
CONFigure MEASure
// trigger source external
// external trigger slope - positive
// 1s delay after trigger received
Triggering and Gating
(query form)
set a defaut delay of
5
131