Publicité
Les langues disponibles
Les langues disponibles
7
Formats and Data Flow
User preferences include settings such as:
– display brightness, radix, separator, and screen saver state
– Help language selected
– state recall and select settings
– reference oscillator source, external reference frequency, standby setting
– auto-level minimum frequency
– battery state (enabled, disabled)
– beeper setting
– measurement time out
– 531xx SCPI compatibility language setting
When loading a preferences file that specifies a static IP address for LAN, be
careful that this does not result in two instruments with the same IP address on
your LAN. This could result in LAN configuration errors on both instruments.
User preferences cannot be stored or loaded (retrieved) using the front panel.
Using *SAV and *RCL
Additional commands that can be used to save and recall instrument states are
the IEEE-488.2 common commands
five states can be saved and recalled by location number from the counter's
internal flash memory. States saved using this method can also be specified for
recall at power-on.
*SAV {0|1|2|3|4}
Saves the current instrument state in one of five
locations. State location '
power-down is automatically saved in location '
saved there. All parameters of the counter's state are saved with the exception of
"user-preference" parameters such as those which configure the front panel
display.
210
and
*SAV
' is a valid location; however, the instrument state at
0
. With these commands, up to
*RCL
flash memory state
{0|1|2|3|4}
' and will overwrite any state
0
Keysight 53210A User's Guide
Publicité
