Keysight 53210A Mode D'emploi page 152

6 53210A Math, Graphing, and Data Logging
Scaling function results must be in the range of
+1.0E-24 to 1.0E+24
(negative infinity),
Following a reset (
function is set to
Scale Reference Value
The
PPM
or specified directly with the commands:
CALCulate[1]:SCALe:REFerence:AUTO {OFF|ON}
CALCulate[1]:SCALe:REFerence:AUTO?
CALCulate[1]:SCALe:REFerence {<reference>|MINimum|MAXimum|DEFault}
CALCulate[1]:SCALe:REFerence? [{MINimum|MAXimum|DEFault}]
ON
subsequent readings in the reading count (trigger count x sample count).
disables automatic selection and requires the reference to be specified directly.
Following a reset (
reference selection is enabled (
<reference>
readings in the reading count.
152
. Results outside these limits will be replaced with
, or
0
*RST
.
NULL
, , , and
NULL PCT PPM
, and the value cannot be '0'
PPB
- automatically selects the first measurement as the reference for all
*RST
- specifies the reference value directly. The reference is used for all
(positive infinity).
+9.9E+37
) or instrument preset (
scaling functions require a reference value. For
PPB
The reference can be obtained automatically
.
) or instrument preset (
).
ON
-1.0E+24 to -1.0E-24
), the scaling
SYSTem:PRESet
), automatic
SYSTem:PRESet
Keysight 53210A User's Guide
, , or
0.0
-9.9E+37
,
PCT
(query form)
(query form)
OFF