Keysight 53210A Mode D'emploi page 90

3 53210A Measurements
Table 3-2
Parameter
Input
Trigger source
Trigger slope
Trigger delay
Trigger count
Sample count
GATE Source
External Gate Source
Math
Graphics
Auto-level Frequency
Measurement Timeout
Reference oscillator
Reading Format
Data Storage
Instrument Status
90
Counter Configuration using CONFigure and MEASure
CONFigure/MEASure Setting
range, low-pass filtering, coupling,
impedance and noise rejection are
unchanged from previous or their
power-on settings.
IMMed iate
NEGative
0.0 seconds
1 trigger
1 sample
Based on measurement function
specified by the CONFigure or
MEASure command.
Gate In/Out BNC
Disabled, including the individual
calculate functions. Other
parameters are unchanged.
Unchanged
Unchanged
Unchanged from previous settings.
Unchanged from previous settings.
Unchanged from previous settings.
Unchanged from previous settings.
Low-Level Command/Subsystem
INPut{[1]:RANGe
INPut[1]:FILTer
INPut[1]:COUPling
INPut[1]:IMPedance
INPut[1]:NREJect
TRIGger:SOURce
TRIGger:SLOPe
TRIGger:DELay
TRIGger:COUNt
SAMPle:COUNt
SENSe:FREQuency:GATE:SOURce
OUTPut:STATe
CALCulate1 subsystem
CALCulate2 subsystem
SYSTem:ALEVel:FREQuency
SYSTem:TIMeout
SENSe:ROSCillator:SOURce
SENSe:ROSCillator:SOURce:AUTO
SENSe:ROSCillator:EXTernal:FREQu
ency
FORMat Subsystem
DATA Subsystem
STATus Subsystem
Keysight 53210A User's Guide