Publicité
Les langues disponibles
Les langues disponibles
Table 2-2
Keysight IO Libraries Suite System Requirements.
Operating System
Processor
Available Memory
Available Disk Space
Video
Web Browser
Note: because of the installation procedure, less memory may be required for operation than for installation.
Loading the Software
Close all applications on your computer. Download and install the IO Libraries
software from www.keysight.com/find/iosuite. Follow the instructions as
prompted for a typical installation. Accept all default d irectories specified if
prompted.
If another vendor's implementation of VISA (Virtual Instrument Software
NOTE
Architecture) is currently installed on your computer, continue installation of the
Keysight IO Libraries by installing Keysight VISA in side-by-side mode. More
information on side-by-side operation can be found in IO Libraries Suite Help
(available after installation is complete) under "Using Keysight's and Other
Vendors' Products Together."
After the IO libraries have been installed, close the installation wizard. If
applicable, continue with instrument driver installation as described below.
Otherwise, continue with the "Adding Instruments to the PC Interface" section of
this chapter.
Keysight 53210A User's Guide
53210A Software Installation and Interface Configuration
Windows XP (SP 3 or later)
600 MHz or higher required
800 MHz recommended
256 MB minimum
1 GB or greater recommended
1.5 GB
– 1 GB recommended for Microsoft .NET
Framework 2.0 SP2
– 65 MB for Keysight IO Libraries Suite
Super VGA (800x600) w/ 256 colors or more
Microsoft Internet Explorer 6.0 or greater
Windows Vista /Windows 7
32/64-bit ed itions
1 GHz 32-bit (x86)
1 GHz 64-bit (x64)
1 GB minimum
1.5 GB
– 1 GB recommended for Microsoft .NET
Framework 2.0 SP1
– 65 MB for Keysight IO Libraries Suite
Support for DirectX 9 graphics w/128 MB
graphics memory recommended
(Super VGA graphics is supported.)
Microsoft Internet Explorer 7 or greater
2
57
Publicité
