Keysight 53210A Mode D'emploi page 230

A 53210A Error Messages
Table A-1 53210A Error Message Descriptions.
Code Message
Command Errors
-100 Command Error
-101 Invalid character
-102 Syntax error
-103 Invalid separator
-104 Data type error
-108 Parameter not allowed
-109 Missing parameter
-110 Command header error
-111 Header separator error
-112 Program mnemonic too long
-113 Undefined header
-114 Header suffix out of range
-120 Numeric data error
-121 Invalid character in number
-123 Exponent too large
-124 Too many d igits
230
Description
Generic syntax error - a Command Error as has occurred.
An invalid character is present in the command's header or in a
parameter.
An unrecognized (misspelled) command was received or separator
between parameters is missing.
An invalid separator (e.g. something other than a comma, space,
or semicolon) was received.
The wrong data type (number, character, string, expression) was
used when specifying a parameter.
More parameters were received than expected for the command
header.
Command requires a parameter or parameters.
An error was detected in the command header but more specific
information is not available.
An invalid separator follows the command header. A valid
separator is usually a (blank) space.
The command header contains more than 12 characters.
The command header is syntactically correct, but undefined for
the instrument.
A numeric suffix included as part of the command header is out of
range (e.g. '3' when only '1' or '2' is valid.
A numeric data element was detected but more specific
information is not available.
A character other than a number, comma, or decimal point is
embedded in the number specified.
The magnitude of the exponent is greater than 32,000.
The mantissa (the positive fractional part of the number) contains
more than 255 digits.
Keysight 53210A User's Guide