Checking The Hour Meter/Lcd Error Display - Stryker Power-PRO IT Manuel D'utilisation

Power-PRO Cot User Controls

CHECKING THE HOUR METER/LCD ERROR DISPLAY

English
The hour meter (C), located on the foot end control enclosure, indicates the amount of time (HHH.H hours) that the
hydraulics have been activated as shown in Figure 19. You can use the hour meter to determine the frequency for
preventative maintenance procedures as listed on page 1-62.
The error display (C), located on the foot end control enclosure, provides error code information for troubleshooting.
See "LCD Error Codes" on page 1-75.
B
C
Figure 19: Foot End Control Enclosure
Return To Table of Contents
www.stryker.com 6516-109-005 REV B 1-29