Using The Hour Meter - Stryker Power-PRO XT 6500 Manuel D'utilisation Et D'entretien

English

USING ThE hOUR METER

The hour meter, located on the foot end control enclosure as shown in Figure 39, indicates the amount of time (HHH.H
hours) that the hydraulics have been activated. You can use the hour meter to determine the frequency for preventative
maintenance procedures as listed on
Return To Table of Contents
1-46
Operation Guide
page 1-67.
A
Figure 39: hour Meter
6500-109-005 REV A www.stryker.com