Clutch Lever - Ducati MULISTRADA 1000DS Mode D'emploi

Clutch lever (fig. 20)
Lever (1) disengages the clutch. It features a dial adjuster
(2) for lever distance from the twistgrip on handlebar. To
adjust, keep lever (1) completely extended, turn dial
adjuster (2) and set it to one of the four available positions.
Remember that:
position no. 1 gives maximum distance between lever and
twistgrip, whereas lever and twistgrip are closest when
adjuster is set to position no. 4.
When you pull in the lever (1), you will disengage the
engine from the gearbox and therefore from the driving
wheel. Using the clutch properly is essential to smooth
riding, especially when moving off.
Warning
Set clutch lever when motorcycle is stopped.
Important
Using the clutch properly will avoid damage to
transmission parts and spare the engine.
Note
It is possible to start the engine with side stand down and
the gearbox in neutral. When starting the bike with a gear
engaged, pull the clutch lever (in this case the side stand must
be up).
2
fig. 20
E
31