Clutch Lever - Ducati MULTISTRADA 1000DS S Mode D'emploi

Clutch lever (fig. 20)
Lever (1) disengages the clutch. It features a dial adjuster
(2) for lever distance from the twistgrip on handlebar.
To adjust the lever (1), leave it all the way out and turn
the knob (2) to one of the four possible positions.
Bear in mind that:
position 1 corresponds to the maximum distance
between lever and grip, while position 4 corresponds to
the minimum distance.
When you pull lever (1), transmission is disengaged from
the engine to the gearbox and therefore from the driving
wheel. Using the clutch properly is essential to smooth
riding, especially when moving off.
Warning
Set clutch and brake lever when motorcycle is
stopped.
Important
Using the clutch properly will avoid damage to
transmission parts and spare the engine.
Notes
It is possible to start the engine with side stand down
and the gearbox in neutral. When starting the bike with a
gear engaged, pull the clutch lever (in this case the side
stand must be up).
2
fig. 20
E
31