Cleaning The Motorcycle - Ducati MULISTRADA 1000DS Mode D'emploi

Cleaning the motorcycle

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in. Use specific
products only. Prefer biodegradable products. Avoid
aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
E
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces. Never clean the motorcycle
using hot or high-pressure water jets. Cleaning the
motorcycle with water cleaners may lead to seizure or
severe failure of front fork, wheel hub assembly, electric
system, front fork seals, air inlets or exhaust silencers and
adversely affect the operation of motorcycle safety
features.
Clean off stubborn dirt or exceeding grease from engine
parts using a degreasing agent. Be sure to avoid contact
with drive parts (chain, sprockets, etc.) Rinse with warm
water and dry all surfaces with chamois leather.
82
Warning
Braking performance may be impaired immediately
after washing the motorcycle. Never grease or lubricate
the brake discs. Loss of braking and further accidents may
occur. Clean the discs with an oil-free solvent.