Replacing The Number Plate And Stop Light Bulbs - Ducati MULISTRADA 1000DS Mode D'emploi

Replacing the number plate and stop light bulbs

Unscrew the two screws (1) securing the rear light unit to
the number plate holder; the screws are on the inside of
the number plate holder.
Unscrew the screw (2) and pull the rear light unit
moderately outwards (fig. 66).
Disconnect the rear wiring harness connector (A) and
remove the rear light unit (fig. 67).
1
A
2
E
fig. 66
fig. 67
75