Ducati MULISTRADA 1000DS Mode D'emploi page 172

Extract the burnt-out bulb (10) and fit a new bulb taking
care not to touch the transparent quartz (fig. 61).
Parking light
Disconnect the connections (11) from the terminals (fig.
62).
Extract the parking light bulb (12) from its seat and fit a
new bulb with equal rating.
E
Refitting the bulbs
When you have replaced any burnt-out bulbs, reconnect
the cable connectors you had disconnected previously to
the bulb terminals. Refit the headlight cover into its seat so
as to match the contour and tighten the retaining clips to
secure cover to headlight body.
Note
Bulb terminal cables can be swapped.
72
10
fig. 61
12
11
fig. 62