Ducati MULISTRADA 1000DS Mode D'emploi page 158

Fixed headlight fairing
Loosen the six retaining screws (1) placed on both sides of
the headlight fairing to release the inner panel and then lift
panel to remove it (fig. 44).
1
Note
Be careful not to scratch the headlight fairing when
removing the inner panel.
E
Loosen the six screws (2) that retain the fixed headlight
fairing to the headlamp holder (fig. 44a).
Remove the fixed headlight fairing.
On refitting, tighten the four screws in the centre first and
fig. 44
then the two screws at the sides.
Position the inner panel on the fixed headlight fairing so
that the holes match.
Tighten the six screws (1); do not overtighten or you will
damage the inserts fitted to the fixed headlight fairing.
2
2
fig. 44a
58