"Odometer" indication (fig. 10)
Indicates total distance covered by the vehicle.
"TRIP meter" indication (fig. 10)
This function indicates the distance covered since the
meter was last reset. To reset this readout, enter the
relevant function and hold down button (A, fig. 5) for at
least 2 seconds. When a value of 9999.9 km (or miles) is
reached, the display will automatically reset.
E
Average speed, average fuel consumption and fuel used
indications will reset automatically each time you reset the
trip meter.
"Average speed" indication (fig. 10)
This function indicates vehicle average road speed.
Average speed calculation is based on the distance
travelled since the "TRIP meter" was last reset.
Upon reaching 280 kph (174 mph), the display will show
three dashes "---".
"Instant fuel consumption" indication (fig. 10)
This function indicates the instant consumption of the
vehicle when in motion (engine on). When the vehicle is
stopped with engine running, a string of dashes is
displayed "--.-". With vehicle stopped and engine off "0.0" is
displayed.
fig. 10
18