Replacing The Headlight Bulbs - Ducati MULISTRADA 1000DS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replacing the headlight bulbs

Before replacing a burnt-out bulb, make sure that the new
bulb complies with the voltage and wattage specified in
the "Wiring diagram", page 92. Always test the new bulb
before refitting any parts you have removed.
Shown in fig. 55 are the locations of the low beam bulb
(LO), high beam bulb (HI) and parking light bulb
(1) of the headlight.
To gain access to headlight bulbs, release the upper and
lower clips (2) working from the sides of the fixed
headlight fairing under the instrument panel (fig. 56) and
open the cover (3).
Note
The headlight is shown removed from the vehicle for
better clarity.
1
2
3
fig. 56
LO
E
HI
fig. 55
2
3
3
2
69

Publicité

Table des Matières
loading

Table des Matières