Publicité
All manuals and user guides at all-guides.com
REAR SHOCK ABSORBER
EC5852B0
Rear shock absorber
NOTE:
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
NOTE:
5 - 62
1. Install:
Dust seal 1
O-ring 2
New
Collar 3
Apply the molybdenum disulfide grease on
the bearings.
Apply the lithium soap base grease on the
dust seals, O-rings and collars.
2. Install:
Rear shock absorber
3. Install:
Bolt (rear shock absorber-frame) 1
Nut (rear shock absorber-frame) 2
56 Nm (5.6 m · kg, 40 ft · lb)
4. Install:
Plain washer 1
Bolt (rear shock absorber-relay arm) 2
53 Nm (5.3 m · kg, 38 ft · lb)
Apply the molybdenum disulfide grease on
the bolt.
Insert the bolt from right side.
5. Install:
Rear frame 1
Bolt (rear frame) 2
26 Nm (2.6 m · kg, 19 ft · lb)
Bolt (reservoir tank) 3
10 Nm (1.0 m · kg, 7.2 ft · lb)
6. Tighten:
Screw (air cleaner joint) 1
CHAS
Publicité
