Publicité
REAR BRAKE PAD INSULATOR INSPECTION/
Å
ı
All manuals and user guides at all-guides.com
BRAKE FLUID LEVEL INSPECTION
EC36b000
REAR BRAKE PAD INSULATOR
INSPECTION
EC367001
BRAKE FLUID LEVEL INSPECTION
a Lower level
Å Front
ı Rear
3 - 30
3. Inspect:
Brake fluid level
Refer
to
"BRAKE
INSPECTION" section.
4. Check:
Brake pedal operation
A softy or spongy feeling → Bleed
brake system.
Refer
to
"BRAKE
BLEEDING" section.
1. Remove:
Brake pad
Refer to "REAR BRAKE PAD INSPEC-
TION AND REPLACEMENT" section.
2. Inspect:
Rear brake pad insulator 1
Damage → Replace.
1. Place the master cylinder so that its top is
in a horizontal position.
2. Inspect:
Brake fluid level
Fluid at lower level → Fill up.
Recommended brake fluid:
DOT #4
WARNING
Use only designated quality brake fluid to
avoid poor brake performance.
Refill with same type and brand of brake
fluid; mixing fluids could result in poor
brake performance.
Be sure that water or other contaminants
do not enter master cylinder when refill-
ing.
Clean up spilled fluid immediately to
avoid erosion of painted surfaces or plas-
tic parts.
INSP
ADJ
FLUID
LEVEL
SYSTEM
AIR
Publicité
